ARC-1203

$250.00

ARC-1203 series internal PCIe 2.0 host RAID controllers are the cost-effective solutions for connecting 2/4/8 6Gb/s SATA peripherial devices.

0 People watching this product now!

Category: ARECA

Description

Highlights of ARC-1203

✵ Supports up to 2 x M.2 drives

✵ Support up to 512B DDR3-1066 cache

✵ Support on-board supercapacitor

✵ Self-encrypting drive management

✵ Support read/write cache allocation by policy

✵ Redundant flash image for adapter availability

✵ Support RAID level 0, 1 and Single Disk(Single/Dual)

✵ Native OS NVMe host drivers

✵ Broad operating support including Native OS NVMe host drivers, Windows, Linux (open source),FreeBSD (open source), Soaris (open source), Mac and VMware

PCIe 2.0 X4 to M.2 Cached NVMe RAID Adapter

The Areca ARC-1203 NVMe Native RAID host adapter is a PCIe 2.0 x4 bus to 2 ports PCIe 2.0 X1 M.2 disk array host adapter. When properly configured, the M.2 RAID adapter can provide a high degree of performance and fault tolerance with data mirroring for maximum protection.

The ARC-1203-2N NVMe RAID adapter is ideal for NVMe boot applications as it naturally provides operating system and recovery data protection that is physically isolated in the system from volume user data. This isolation is critical for applications that require reliable access to the logs and OS boot programs without any chance of being corrupted by user data.

	ARC-1203-2N M.2 Cached RAID Adapters
RAID-on-Chip Controller	ARM_based storage I/O processor@ 1.066 GHz
Cache Memory	512 MB on-board DDR3-1066 SDRAM with ECC protection
Host Bus Interface	4-Lane PCI Express® 2.0
Drive Connectors	2 x M.2 Connectors
Drive Interface	Gen 2.0 X1 PCIe (NVMe)
Physical Dimensions	Low Profile: 168(L) x 64.4(H) mm
Power Dissipation	Typical: 8W
Operating Temperature	0°C to 60°C with 200 LFM airflow
Operating Humidity	10% to 85%, non-condensing
On-board Supercapacitor	Yes
RAID Features	* RAID level 0, 1 and Single Disk(Single/Dual) * Multiple RAID selection * Configurable stripe size up to 1MB * Array roaming * RAID level/stripe size migration * Capacity expansion and RAID level migration simultaneously * SED (self-encrypting drives) function support * On-board supercapacitor for Non-PLP NVMe drive and LED indicator ready * Support NTP protocol synchronize RAID controller clock over the on board Ethernet port