Atola TaskForce : SUMURI
$2,300.00
Atola TaskForce is a high-performance forensic imager capable of working with both good and damaged media. It supports SAS, SATA, USB and IDE drives via 18 ..
Description
Atola TaskForce
Maximum imaging power for your forensic lab
- Image 25+ drives simultaneously at 25 TB per hour.
- Automatically reassemble and image RAIDs.
- Acquire data even from damaged drives.
- Get the full power of the server-grade hardware and two 10Gb network ports.
26 ports to maximize imaging capacity
Image dozens of individual evidence devices, automatically reassemble RAIDs with an unknown configuration consisting of an unlimited number of members (drives and/or images), or securely wipe a whole bunch of drives for future use – all at once, at top native speeds.
To simultaneously image 25+ evidence devices and run other forensic tasks at 25 TB/hour, Atola TaskForce is equipped with 26 ports of all popular types
- 8 SATA
- 8 SAS/SATA
- 4 NVMe M.2/U.2 PCIe 4.0
- 4 USB
- 1 IDE
- 1 Extension slot for pluggable M.2 SSD, Apple PCIe SSD, Thunderbolt extension modules
All respective drive interfaces are supported: M.2 / U.2 NVMe, SATA I/II/III, SAS3 (12 Gb), USB 2.0/3.x, IDE. Flash cards are supported via a USB card reader.
16 ports for SATA drives
Atola TaskForce has eight SATA ports and eight SAS/SATA ports.
Plug in up to 16 SATA drives and image them in parallel to a network server
through two superfast 10Gb Ethernet ports.
Four M.2/U.2 ports for NVMe drives
To help you with the ever-growing number of NVMe M.2 drives in forensic cases, Atola TaskForce has four M.2/U.2 ports:
- PCIe 4.0 interface
- Support for both M.2 and U.2 drives.
- Fast & convenient hot-swap of drives.
With M.2 extension connected to the extensions slot, you can image 5 NVMe drives simultaneously.
Clear indication for maximum control
At a glance, get an instant understanding of what’s happening with TaskForce 2
and your tasks thanks to LED status indicators on the front panel.
Power LED indicator
Signals that hardware is up and running.
Color-coded port LEDs
Indicate that a task is running or finished, a process is OK or there are issues.
IP display
Shows an IP address to connect to the TaskForce 2 user interface or Kiosk mode.
Configurable hardware write protection
Configure all 26 ports according to your needs, as each of them can be set either to the source or target mode.
The source mode turns on hardware write protection to eliminate any possibility of altering your digital evidence.
A dedicated LED indicator next to each port signals that the source mode on this particular port is enabled.
To use a drive as an imaging target, alter or securely erase its contents, switch its port to a target mode.
25+ parallel imaging sessions
Image at 25 TB/hour cumulative speed when running 25+ simultaneous sessions at the top native speeds of the drives. Image to the network via two 10Gb Ethernet ports, to another drive, or a forensic file on an encrypted storage drive.
Copy every single bit of an evidence drive or use smart filters to image only selected partitions, folders, or files. Pause an imaging session and resume it later.
You must be logged in to post a review.
Reviews
There are no reviews yet.